There are several ways for Hangzhou True Color Packaging Products Co., Ltd. to deal with printing lubrication: (1) After the running-in period, the new machine should change oil in time, including every change in the future.
油)要清潔油箱和齒輪，清除附著在上面的固體顆粒。在維修工作中盡可能保持潤滑油的潔凈，避免固體顆粒進入。(2)新油并不總是干凈的，某些小的潤滑油生產商和經銷商在生產、灌裝、存儲、運輸過程中不能嚴把質量關，極易造成新油中固體顆粒和水分含量超標。要選擇正規的潤滑油供應商，保證購入油品的質量，切不可圖便宜，購買劣質油品。 (3)潤滑油應在清潔的房間存放，存放時注意保持密封，避免固體顆粒和水進入。加油工具要專用并保持清潔，可以與潤滑油放在同一房間。 (4)做好機器油箱的密封，避免空氣中的灰塵和潮氣進入。及時治理機器漏油，避免污染環境和浪費，注意不能只添油不換油。 (5)使用好的機油濾芯并及時更換。在濾芯上的投資可以從設備壽命上得到更大回報。
Oil) To clean the tank and gear, remove the solid particles attached to it. Keep the lubricating oil as clean as possible in the maintenance work and avoid solid particles entering. (2) New oil is not always clean. Some small lubricant producers and distributors can not strictly control the quality in the process of production, filling, storage and transportation. It is very easy to cause solid particles and moisture content in new oil to exceed the standard. To select a regular lubricant supplier and ensure the quality of the oil purchased, it is absolutely impossible to purchase inferior oil products cheaply. (3) Lubricating oil should be stored in a clean room and kept sealed to prevent solid particles and water from entering. Refueling tools should be dedicated and kept clean. They can be placed in the same room as lubricants. (4) Do a good job of sealing the machine oil tank to avoid dust and moisture in the air. The oil leakage of the machine should be treated in time to avoid environmental pollution and waste. Attention should be paid to not only adding oil but also not replacing it. (5) Use good oil filter element and replace it in time. Investments in filter elements can yield greater returns on equipment life.